(1) SINGLE PASS DOORS where indicated shall be nominally (specify: 3ft0in (914); or 2ft8in (813)) wide by (specify: 6ft8in (2032); or 7ft0in (2134)) high. Doors shall be manufactured of the same materials and thickness as the panels and be equipped with butt-type hinges and positive latches with drop cup and ring pulls. Double doors have roller latches. Options: deadbolt locks; self illuminated exit signs; hydraulic door closers; A.D.A. compliant friction roller latch with flush pulls.

(2) TACKBOARDS where indicated shall be nominally (specify: 48in (1219)) high; or full panel height). Tackboards shall consist of 4in (6) cork surfaced with minimum 30oz per lineal yard Type II Fabrictex vinyl fabric (color to be selected from manufacturerfts standards) and bronze trimmed.

(3) CHALKBOARDS where indicated shall be nominally (specify: 48in high; or full panel height). Chalkboards shall be chalkable porcelain enameled steel (color to be selected from manufacturerfts standards) and bronze trimmed.

(4) MARKERBOARDS where indicated shall be nominally (specify: 48in (1219) high; or full panel height) and be of suitable non-porous surfaced porcelain enameled steel for application of write-on, wipe-off marker pens. Color of markerboards to be selected from manufacturerfts standards and bronze trimmed.

(5) RECESSED TRAY for storing chalk or marking pens and erasers shall be installed where indicated and shall be bronze color.

FURTHER INFORMATION. All dimensions shown in parentheses are millimeters.